Skip to main content

Mobile drill stands are suitable for drilling into walls or beams. They are quite light, mobile, and flexible in use.

Allow to you drill corner holes as standard and especially suitable for DIY enthusiasts because they are is quite precise and, unlike a tabletop, drill stands, takes up less space.

With a mobile drill stand, you can be transported quickly and easily and immediately continue drilling on-site without wasting much time.

The Best Professional Mobile Drill Stands

Dremel Drill Press Rotary Tool Workstation Stand with Wrench

 4,9 Rating


  • 3-in-1 tool: It’s a drill press, rotary toolholder, and flex-shaft tool stand.
  • Ideal for crafts, hobbies, metalworking.
  • 15-degree articulation.
Check Best Price

Articulating Drill Press- Drills Perpendicular and Angled Holes in 15-degree Increments, up to 90 Degrees Horizontal. The telescopic shaft measures 16 – 29 inches which are quite long for a drill press stand, but it allows you to can easily drill all materials with it, short or tall.

Mobile Drilling Stands Dremel 220-01

Buyer’s guide for mobile drill stands

This review and guide provide information on some best mobile drill stands you can find.

There are quite a few manufacturers of mobile drill stands on the construction market today, and prices vary widely depending on the model and design. From a pure price point of view, mobile drill stands are available in models that can be purchased at prices ranging from $30 to $66 each.

The best mobile drill stands

The Mobile-drill-stands

All our reviews are based exclusively on expert judgments or practical experience with most of the mobile drill stands we have tested. We strive to make our guide as independent and as detailed as possible.

Reviews of mobile drill stands

Wolfcraft Multi-Angle Drill Guide Attachment For 1/4In. & 3/8In. Drills

  • Lightweight cast aluminum baseplate.
  • Angle-Measuring Scale.
  • Wide variety of round and odd-shaped work-pieces up to 3 in. diameter.

 4,8 Rating

Check Price

Wide range of inclination of the guide

Wolfcraft Multi-Angle Drill Guide allows you to drill clean, accurate holes with your portable drill. Sets up fast and is perfect for indoor and outdoor projects where you need accurate holes, but using a drill press isn’t an option. The guide accommodates all 3/8 in. and 1/2 in. drill chucks and can be used in horizontal, vertical, or angled positions, anywhere from 0-45 degrees.

Milescraft Drillmate Drill Guide with chuck

  • Perfect for straight or angled drilling.
  • Attaches to all 3/8″ And 1/2″ Power drills.
  • Compatible with most 3/8” drill accessories.

 4,9 Rating

Check Price

Option direct and angle drilling

With the Milescraft DrillMate portable drill stand, you can drill straight holes, angled holes, on the edge of a board, or even round stock. Drillmate drill can be mounted in a fixed position on the base for maximum support no matter what drilling motion you are doing.

Milescraft ToolStand Drill Press Stand

  • Maximum travel of 7″.
  • Formed steel 9.5″ x 7″ base.
  • The cord clip prevents the cord from interfering while working.

 4,8 Rating

Check Price

High measurement accuracy

This item is compatible with most Dremel style rotary tools. This machine acts as a drill press to cut perfectly perpendicular holes while a depth-stop gauge makes repetition a cinch. It will make a handy addition to the rest of your rotary tool accessories. Both professionals and amateurs will find it useful for all of their jobs.

What are the types of drill stands?

A drill stand is a drill holder designed to facilitate vertical drilling. There are different types, but basically drill stand holders consist of a drill stand with at least one stand with a return spring, a lever for lowering, and a drill holder.
There are two main types of tools in the drill stand category.

  • Mobile drill stands.

Direct drilling without a mobile drill rig can sometimes be quite difficult. Therefore, for precision work on the construction site, there are drilling guides for large beams or walls, which should really make every drilling a success.
If you want to make sure that the hole in the wall is really straight, a mobile drill stand is the best choice. You’ll get more accurate results than drilling by hand, but you won’t get anywhere near the results of drill rigs. Mobile drill stands are only suitable for drilling on walls.

  • Drill Racks.

These look like floor-standing drills, have a sturdy base with a work surface, and slowly lower onto the workpiece between the baseplate and drill holder. Most drilling and milling machines have a permanent place in the workshop and can work wood, metal, and plastic. They are used for drilling aluminum profiles for the house or pre-drilling fence boards for the garden.
As an accessory for particularly precise work, we recommend using a drill vice. For particularly small jobs, mini drills should be used.



What should you look for when buying the mobile drill stands?

If the drill stands are mobile, it can be transported quickly and easily. A mobile drill stand is particularly suitable for DIY enthusiasts, as it is quite precise and takes up less space than a drill stand or a bench drill.

When buying should pay attention to the following:

  • The diameter of the drill holder.
    When working with mobile drill stands, a drill bit holder with a diameter of 1.7 inches is mainly used. For smaller jobs, drill stands with a 0.79-inch drill chuck are suitable.
  • Working height.
    The height indicates how high the workpiece can be machined. Mounts for portable drills with heights between 7.9in and 12in are adequate for everyday use.
  • Base Plate.
    The larger the baseplate, the larger the footprint. This makes the mobile drill stands more stable. This element is also used as a drill table. If it is a bed with a cross table, you can also use a machine vice for more precise work.
  • Weight.
    Weight is an issue with handheld power tools, as you will need to hold the models in your hand at all times. The mobile drill stands should not be too light so that the model is stable. Since you will need to hold it with the drill, the weight should be less than 4 lb.
  • Quick adjustment and tilting of the tool.
    Quick adjustments of the bed without tools are easy on all models, and manufacturers try to make the adjustments as simple as possible. Some models of mobile drill stands allow for rotation and tilt adjustment. This is especially necessary if you also want to drill at a 45° angle. All models had a depth stop as an accessory for the drill, so you can set exactly how deep the drill should go into the wood.

Mobile Drill Stands Price:


Under 100$

  • Wolfcraft Multi-Angle Drill Guide Attachment For 1/4In. & 3/8In. Drills
  • Milescraft Drillmate Drill Guide with chuck
  • Milescraft ToolStand Drill Press Stand
  • Dremel Drill Press Rotary Tool Workstation Stand with Wrench

How does a mobile drill stand work?

Mobile drill stands consist of a round base, which is attached to a wall or beam. The models do not have a table, but only the holder at the top, which is slowly lowered to 2 stands. So if you want to make sure that the hole in the wall is really straight when doing DIY, a mobile drill stand is the best choice.

Conclusion about the mobile drill stands

When selecting a cheap mobile drill stand, you should pay attention to stability. There is nothing worse than drill stands that are too mobile and swing in all directions. If you have ever used an impact drill in your daily work, you know the difficulty of applying the necessary pressure on the drill.

With the mobile drill stand, you can quickly and easily transport and drill directly on site. However, using an impact drill requires significant pressure on the drill bit, and without a mobile drill stand, you run the risk of serious drilling injuries.

The main application is drilling precise holes in wooden beams or walls. The mechanical advantage of the mobile drill stand makes it easy to achieve the required force.

FAQs- The Best Mobile Drill Stands

✅ Which impact drill is suitable for a mobile drill stand?

Vertical drilling without a drill stand can sometimes be difficult. But when buying a high-quality mobile drill stand, the question inevitably arises whether the old machine is suitable for it. Basically, you can clamp any drill bit that has a normal diameter of 1.7 inches. This diameter fits all standard models from the hardware store.

✅ Mobile core drill rig: How do I clamp the workpiece?

The workpiece must be held securely on the mobile core mobile drill stand while drilling. Of course, you can simply hold the workpiece. However, there is a risk that it will move. If you really want to be absolutely sure, you should clamp the workpiece with a screw clamp or use a machine vice for small parts.

✅ A stand for core drilling: Which one is recommended?

Which drill stand is best for your purposes is, of course, up to you to decide. For model work, mobile drill stands are suitable, which are easy to set up, and should be reliable and accurate.

✅ How do I build my own drill stand?

There is no point in building a drill stand yourself. Of course, all you need is a baseplate, a guide column, or tripod with a lever and return spring and a holder for the drill. But adjusting the individual parts so that they really fit together exactly is very difficult.

Max Welder

Max Welder

Hi! I'm Max Welder ( I always wanted to work with my own hands, repair something, do things. Now I combine my knowledge with computers and my own knowledge in the field of mechanics in order to understand which tools I like the most. I hope to convey some knowledge and experience.

Leave a Reply