Milwaukee has become the world’ s leading manufacturer of innovative power products and equipment. Established in 1924, it has become the favorite of plumbers, builders, contractors, electricians, and DIY enthusiasts worldwide. By creating and engineering electric tools, portable devices, accessories, and professional products, they are capable of performing the heaviest and most challenging building tasks with ease and efficiency.
Some electrical devices that Milwaukee is famous for are cordless drills and impact drivers. The cordless drill and the impact screwdriver complete one another, so when you’re performing heavy-duty drilling and driving tasks, they’re a must for your tool set.
Today, battery-powered screwdrivers can come into the race against their cord-type mates and beat the competition. They can also supply performance and access to areas that their corded counterparts cannot. They provide plenty of ways to get the job done faster and more effectively.
Here we go to take a more detailed look at the top Milwaukee cordless drills and impact drivers available on today’s market. When these tools are in action, let’s take a look at what a serious effect they have when applied.
Milwaukee cordless screwdriver
Milwaukee 2462-20 M12
LED lights on the side of the impact driver show you how much battery capacity you have left
Onboard fuel gauge LED lights
Ambidextrous belt clip
TOP Milwaukee Cordless Screwdriver
Variable speed trigger
Up to 60% more power
Delivers up to 275 in lbs of Torque.
New ergonomic handle design
Best Milwaukee cordless screwdriver Review
Best Cordless Right Angle Drill & Driver
Milwaukee Cordless Screwdriver
1. Milwaukee 2462-20 M12
Whether you are right- or left-handed, you can attach the supplied belt clip to the side of the rider that is most comfortable for you
2. Milwaukee M12 12V
Milwaukee M12 3/8-inch drill/driver equipped with belt clip 12V engine produces up to 275-inch pounds of torque
3. Milwaukee 2656-20 M18
The small dimensions of this portable tool are enhanced by the patterned elastic handle, allowing you to operate in slick environments
4. Milwaukee MLW2504-20
The hex-Impact driver sets the bar even higher for 12V power – with the highest speed, performance, and dimensions in its category
5. Milwaukee 2607-20
Light up your job with the LED panel below the keyless chuck, which helps reduce shadows, so that you can stay concentrated on the real task
6. Milwaukee 2804-20
Can reach a maximum speed of 2,000 RPM
Equipped with Redlink Plus intelligence
7. Milwaukee 2853-20
The brushless POWERSTATE engine increases driving speed by over 30 percent and boosts operator efficiency
8. MILWAUKEE 2760-20
The chuck can be operated with one hand.
It is one of the quietest drivers on the market.
9. Milwaukee 2691-22
Lightweight construction, integrated LED lamps, battery tank indicator, and adjustable speed shutter release
10. Milwaukee 2615-20
Great selection for do-it-yourselfers
11 Adjustments and modes for selection
Best Milwaukee Cordless Drill – Reviews
- Keep your work object illuminated, with the LED light panel activated by the shutter release button above and in front of the shutter release button
- LED lights on the side of the impact driver show you how much battery capacity you have left
Part of Milwaukee’s M12 Subcompact System, a range of cordless compact power tools designed to be durable, powerful, and comfortable. 2462-20 is one of over 60 tools in the M12 range and is one of the more compact models. It shares the same battery with all tools in this system, perfect for your power tool collection. This impact driver is equipped with Milwaukee Impact Mechanism technology, which increases your productivity with its optimized fastening speed.
2462-20 is the ideal impact driver for anyone looking for a lightweight and compact tool that is easy to carry and yet offers more than enough power. It gets the job done without much arm and wrist effort. It has a long battery life that allows you to work longer, and many other features that provide comfort and convenience at an affordable price.
- Whether you are right- or left-handed, you can attach the supplied belt clip to the side of the rider that is most comfortable for you
- This driver has internal computer technology that communicates with RedLithium batteries that power it. It allows cross-communication between the two systems and prevents the tool’s engine from overheating or consuming more power than it can handle.
- Milwaukee M12 3/8-inch drill/driver equipped with belt clip 12V engine produces up to 275-inch pounds of torque
- The comfortable grip of the Milwaukee M12 cordless drill allows for convenient operation.
Milwaukee’s 3/8″ drill/driver M12 (Bare Tool) is designed to assist you in making holes in drywall and wood and mounting brackets. It uses a 12V engine that delivers a peak performance of 275 inch-pounds of torque for rapid drilling in tough materials. This Milwaukee M12 3/8-inch drill screwdriver features an easy-to-use grip that enables effortless operation during long periods of time with no stress. The integrated indicator displays the amount of load left, allowing you to easily manage your work. The Milwaukee M12 Variable Speed Drill/Driver features two speeds allowing you to operate with the appropriate speed for the job being performed. The ratcheting chuck is completely manufactured from all metal to provide outstanding firmness and stability and to keep the drills safe. With a length of only 7-3/8 inches, it is sufficiently small to fit into confined areas.
- Performance gauge indicates the amount of load remaining, allowing you to conveniently organize your time
- Milwaukee M12 adjustable-speed drill bit features two gears for enhanced performance control
- Metal ratchet chuck provides exceptional drill retention
- Press the shutter button to achieve the performance you need for the task you are performing. This can power the engine to produce up to 3,450 shocks per minute.
2656-20 certainly earns its position on this list of the best cordless impact drivers due to its highly remarkable characteristics. It is capable of driving various kinds of bits easily through any type of material. It has actually been designed and promoted as a serious device, and that is not surprising.
This impact driver uses the Milwaukee-protected 4-pole frameless engine, which ensures greater longevity and higher efficiency. As with nearly all Milwaukee power products, this engine is covered by a five-year guarantee to back up the promise of a superior impact driver. 2656-20 has all the proper functions for DIY applications like installing TV or CCTV cameras, as well as being great for work on wood or driving impact bolts. When you require a drill bit for repeated drilling or drive-in jobs, then this is the perfect drill for you.
- Light up your task with the LED lamp, which is placed just below the rapid-action chuck.
- The small dimensions of this portable tool are enhanced by the patterned elastic handle, allowing you to operate in slick environments.
- The hex-Impact driver sets the bar even higher for 12V power – with the highest speed, performance, and dimensions in its category
- This device complies with customer demands
- The device is simple to handle
The hexagonal impact driver once more sets the bar higher for 12V power, with the highest driving speed, output, and dimensions in its category. By putting the emphasis on efficiency, this impact driver completes the work more quickly by delivering over 20% the higher speed of application than the competitors. This device offers more than 1,300 inches of output. Pounds. Torque, enabling the operator to perform greater job efficiency by applying a wide range of attachments. The compact length of only 5.1″ provides unmatched accessibility in confined areas.
- You can change between Drift, Drill, and Hammer Drill modes so the machine can handle soft and solid woods, brickwork, and even certain types of steel with the help of the 18-position clutch.
Milwaukee has developed another powerful tool for intensive construction projects on the roughest building sites. 2607-20 is a cordless hammer drill that is both lightweight and of unparalleled performance. It can easily drill holes through softwood, hardwood, and masonry with just a flick of the drill mode selector switch on the top of the drill bit. With a weight of just 3 pounds, you can carry the hammer drill around with you all day without tiring. If you can’t hold on to it and it falls to the ground from a ladder, you can rest assured that the all-metal casing of the transmission helps protect the internal components from impact. Even in suboptimal conditions, such as dark basements or crawlways, you will be able to do a good job. The LED lighting under the keyless chuck keeps your work illuminated and shadow-free so you can perform precise pilot drilling. Internally, the Model 2607-20 features Redlink technology, which connects it to the built-in M18 batteries. This communication prevents the forage from overheating, maximizing efficiency on the job site.
- Light up your job with the LED panel below the keyless chuck, which helps reduce shadows, so that you can stay concentrated on the real task.
- You can attach the included belt clip to both sides of the device so that you can carry it on your belt for convenient carrying, no matter how handy you are.
- It provides a peak torque of 1,200 in-lbs
- Brushless engine
- Equipped with Redlink Plus intelligence
- Lateral grip
- Can reach a maximum speed of 2,000 RPM
Milwaukee 2804-20 is fitted with a brushless engine designed for this M18 fuel 1/2″ drill. It will contribute to delivering at a minimum 60% greater performance in comparison to other hammer drills currently available. Featuring the Redlink Plus intelligence function, you can rest assured that this hammer drill will offer you absolutely great power.
Probably the most important thing about Milwaukee 2804-20 is that the drill is safe from harm to both the battery and the tool, particularly when working under heavy loads. Yet an additional benefit of this hammer drill is that it is fully interchangeable with the other M18 units.
The Milwaukee 2804-20 is operated with a red Lithium XC5.0 battery too. The battery is powerful enough to do double the work every time you charge it. It means that it offers long-term power that is better than other competitors’ products. With a peak power output of 1,200 in-lbs., it will certainly provide you with the dependable output you require for the task at hand.
- The brushless POWERSTATE engine increases driving speed by over 30 percent and boosts operator efficiency.
- The four-mode output controller allows improved control of both drive velocity and performance. The smallest impact driver 4.59″ long enables better reach in confined areas.
The M18 FUEL 1⁄4 in. Hex Impact Driver is the quickest, highly portable, and high-performance driver in its category. With a size of only 4.59 inches, this cordless device enables operators to access the driver better in confined areas. The 4-mode drive system provides better control of drive speed and performance for outstanding flexibility. The self-threading screw ensures quicker set-up time by minimizing fastener release. POWERSTATE brushless engine produces up to 30% better output speed, improving operator efficiency. Built-in REDLINK PLUS intelligence delivers maximum productivity and ensures thermal shutdown to avoid damaging the machine and battery in tough situations while keeping compatibility throughout the M18 range.
- It is one of the quietest drivers on the market.
- It is supplied with two 5.0ah batteries.
- It has variable speeds that can be adjusted.
One of the best features we love about this cordless impact screwdriver is that it is slim and lightweight. It has comfortable handling and grip that sets it apart from its competitors. The MILWAUKEE 2760-20 uses a hydraulic drive technology that removes metal-to-metal contact, making this one of the quietest cordless impact tools in the history of cordless impact drills. It has two-speed options that make it efficient and smooth for the job at hand. This tool also has a minimum torque demand, and since this is maintained much longer, it is able to drive tough fixings more quickly.
When a user buys this unit, they’ll understand why the two 5.0-a lithium batteries included making it one of the most durable drivers you can use during operation. Charging is very fast, taking just fifteen minutes, and you can start using it right away. The Model 2760-20 also comes with flashlights that illuminate the user’s work area. It also has a belt hook for contractors who need to use it constantly.
- Compact drill/screwdriver provides 400-inch-pound tightening force, is 4 pounds in weight, and 7-3/4 inches in length.
For those who prefer to fix things themselves rather than ask a craftsman for help, it is important to have the right tools at home, such as the Milwaukee 2691 22 Combination Set.
This is an essential component that will prove helpful when the time comes for some repairs to be made.
One of the good things about this product is that it can last long after a single charge.
You can also be sure that the batteries will not be damaged even if you have not charged them, unlike others, which gives you more reason to believe in the durability of this product.
- 1/4-inch hexagonal shaft with 4-pole frameless engine provides 1400-inch-pound drive
- Lightweight construction, integrated LED lamps, battery tank indicator, and adjustable speed shutter release
- Great selection for do-it-yourselfers
- 11 Adjustments and modes for selection
The Milwaukee 2615 is among the least expensive devices currently available and offers a great choice for casual consumers. However, being a professional builder, this may not be the correct angle drill you have been searching for since it can be inconsistent. Made of rigid plastic, it includes a little gum in the design (far from being top).
The user can select from 11 adjustments to make drilling or mounting in confined areas simpler. It features integrated LED illumination and the multi-position grip provides a certain amount of flexibility. This drill is supplied with 1 1 CMPT battery and it is very economical to purchase another if you require a backup battery. This power tool is fully interchangeable with the full range of M18 batteries.
Best Milwaukee Cordless Screwdriver
Choosing the best cordless screwdriver – The ultimate purchasing guide
Whether you are a professional power tool guy or a girl, remember that all cordless screwdrivers are not alike. They are available in various dimensions, capacities, torques, speeds, and different characteristics. And it makes sense, as not all of them meet the same requirements. Therefore, what is the ideal one for you? Well, let’s find out!
The greatest benefit of a cordless drill is comfort. It can be used wherever you are, unlike a corded drill, which needs a power outlet close by and frequently an expansion cable. Although corded drills are typically higher performing, the bigger cordless drills have sufficient capacity and functions to handle most domestic jobs.
Wireless drilling machines are frequently kept in a single hand for extended periods of use. Therefore, tiredness is a normal feature of the use of this instrument.
At some point when you are constructing a deck or completing a shack, tiredness appears. Depending on the weight of your instrument, though, it is possible to determine how fast and how strong the exhaustion is. The lighter weight you can carry, the more comfortable you are probably going to be.
You could have a power drill that weighs just a couple of pounds even with a battery attached. If you are going to use this drill for a prolonged period of time, never be satisfied with something heavy and bulky. Make an investment in a drill that can be operated for hours without any problems.
Size is a further factor that defines the processability of the tool. In the ideal case, you can get something that has a solid frame that allows you to reach narrow areas such as cabinets, corners, and gaps.
You may be able to get high-performance equipment that only requires a few centimeters of room. So look at the size when deciding what to buy.
High-end drills will sometimes contain luxury features that you do not need but may enjoy. LED lights are a good example of this.
Other drills may have magnetic holders on the side, which allow you to store a variety of drills for ease of use. You may even find drills that can hold special attachments such as grinders or sanders.
The more bonus features you get, the more you can expect the drill to cost more, but if you have a healthy budget, look for the extras that will make your home and garden projects easier.
Variable Speed Trigger
Some drills are capable of working at different speeds. These devices have a so-called “variable speed trigger”, which allows you to adjust the rotation of the drill by moderating the pressure you apply to the trigger. This is a great feature if you will be using the drill a lot. Remember, however, that not all variable-speed triggers are the same.
There are many variations in this function, with each unit having a unique range of speed settings. One thing applies to the entire market: the more speed settings you can get, the more versatile your tool will ultimately be.
Ergonomic tools are designed to comfortably fit the human hand. The intention is to reduce fatigue and alleviate the pain that can occur during working days. Almost everyone benefits, and it doesn’t necessarily increase the price of the tool, so keep an eye out for it.
Drillings are really put to the test. They are designed to withstand the wear and tear, but sometimes things don’t go as planned. A nut or bolt comes loose. A motor goes haywire. The tool dies long before its time.
When that happens, a good guarantee will be your best friend. Most companies offer at least one year warranty. Some even offer a satisfaction guarantee, which allows you to return the tool after one month if you are not satisfied with it.
The better the guarantee, the better you will be in the end. Bad products rarely get a solid warranty for the simple reason that companies don’t make big promises for tools they don’t believe in.
Frequently asked questions – FAQ
What is the difference between a drill and a hammer drill?
A drill can drill in one movement clockwise or counterclockwise, which makes it ideal for drilling screws or holes (especially for wood). A hammer drill offers the same function, but in addition has a hammering hammer movement, which applies much more torque and pressure to the drill or screw. A hammer drill is preferred for hard masonry surfaces or materials such as concrete.
Is a brushless drill better?
Brushless engines have seen an uptrend in the last few years (because they are superior). A brushless engine is capable of adjusting to jobs in real-time so the engine can react with more or less power as the resistance level varies. In other words, it delivers performance with greater efficiency and produces less thermal energy thanks to reduced motor resistance. A standard brushed motor always drills at the full power of the speed adjustments.
Milwaukee is a trademark relied upon by professional builders, craftsmen, contractors, and homeowners worldwide. They unite innovation and technology to provide powerful products for the household and building site.
With this overview, hopefully, you get a better understanding of why Milwaukee has become the leader of the power tool industry. Check them out for yourself to gain a sense of the way these drills and drivers have created the list of our top cordless drills and impact drivers.