For the smooth operation of any electrical appliance, certain characteristics of the power supply are required. But often the quality of the supply voltage fluctuates, and its jump leads to the burnout of the heating element or the control panel of highly sensitive equipment.
To avoid this, it is not necessary to buy a powerful and expensive voltage regulator to control the entire power grid in the house. It is enough to secure the most vulnerable appliances.
About choosing a power conditioner
To make the right choice, it is important to consider, first, the mains voltage – minimum and maximum. This is measured with a tester. Usually, low voltage can be determined, for example, by the low-intensity light of incandescent bulbs. Secondly, it is important to trace voltage spikes, which are also measured with a device – a digital analyzer. If we go back to incandescent bulbs, a brief change in their brightness is a true indicator of this phenomenon. Third, it is worth determining the power and nature of the connected load. This is easy to find out from the passport of a household appliance. For example, a refrigerator has a power rating, but at the moment of start-up, it will be several times higher. Finally, the temperature of the air where the voltage regulator is installed should not be neglected.
For appliances such as home theaters, projectors, computers, and televisions, the voltage capacity of the electrical network is of considerable importance. Since voltage spikes significantly shorten the life of any kind of device, accordingly, when buying a power conditioner, it is important to consider its capacity.
Basic requirements for the power conditioner:
- automatic voltage control;
- short circuit protection;
- small size, which is convenient both for comfortable transportation and for installation of the unit;
- noise level filtering.
Why do I need a power conditioner?
There are people who are convinced that power conditioners are nothing more than ordinary extension cords. These same people claim that the only tool you need to ensure optimal power quality is a cheap surge protector.
If that’s really true, why is there such a big demand for power conditioners in the first place? Is their demand justified? The power conditioner solves the problems caused by dirty power. This device acts as an intermediary between the audio equipment that requires an electrical load and the power source that provides that power.
The power stabilizer works to control any improper activity that could potentially damage your equipment and the quality of your sound or video. When high-current equipment and appliances are connected to the system, electromagnetic interference and other deviations can adversely affect performance. The power stabilizer serves as a buffer and counteracts these deviations, i.e. it cleans up the contaminated power in your system.
In simple terms, these devices take in incoming current, filter out electromagnetic interference, smooth out any additional fluctuations, and then deliver “clean” electricity to your equipment. The more electrical appliances you have connected to your system, the greater the risk of excessive noise, voltage spikes, component contamination, and general wear and tear on your equipment. A quality power conditioner will protect your equipment from these and other hazards, including potentially catastrophic events such as lightning strikes.
This is a benefit for anyone who frequently uses high-quality audio and video equipment, such as commercial music venues, professional studios, and even those with residential systems.
Home theater power conditioner - The Best Choice
Panamax 9-Outlet Home Theater Power Conditioning
4,9 Rating
Features:
- 9 protected and filtered outlets.
- Level 3 noise filtration.
- Exclusive automatic voltage monitoring (avm).
Specifically designed and engineered to provide protected and filtered power to your home theater system. Patented AVM circuitry provides the ultimate power protection and filtering for your AV equipment. AVM continuously monitors the incoming line voltage for surges and spikes that could damage your expensive AV system and disconnects your equipment in the event of an overvoltage or under voltage (Brownout).
Panamax High Voltage Demonstration – Video
Choosing a home theater power conditioner
Buyer’s guide for the home theater power conditioner
This review and guide provide information on the best home theater power conditioner you can find.
There are quite a few manufacturers of home theater power conditioners on the market, and the prices vary greatly. From a pure price point of view, the type of home theater power conditioner can be priced from $129 to $330.
Best home theater power conditioner for the money
All our reviews are based exclusively on expert judgments or practical experience with most of the best home theater power conditioner we have tested. We strive to make our guide as independent and as detailed as possible.
Best home theater power conditioners in comparison
Panamax 8-Outlet Home Theater Power Conditioning
- 8 protected and filtered outlets.
- Exclusive automatic voltage monitoring (AVM).
- Level 2 noise filtration.
4,8 Rating
Protect or disconnect technology
Industries the best protection – specifically designed and engineered to provide protected and filtered power to home theater systems. Guards against damaging power spikes and currency fluctuations that can harm your av system components and impact performance.
Furman Power Conditioner
- Assures the delivery of pure AC power.
- Automatic extreme voltage shutdown.
- Reduces AC line noise.
4,9 Rating
Advanced protection to connected equipment
Advanced Linear Filtering dramatically reduces AC line noise and contamination, resulting in improved audio/video clarity. Zero ground contamination circuitry assures the delivery of pure AC power, thus protecting critical audio/video components.
Pyle Power Sequence Conditioner
Power Supply Controller Sequencer System
Power Conditioner is designed to improve the quality of power supplied to your home appliance, music production studio equipment. This power supply controller provides clean AC power to electrical devices. Ensures the safety of equipment w/ noise and distortion eliminator circuitry.
Advantages of home theater power conditioner
Do you want maximum performance from your computers, speakers, instruments, kitchen appliances, home theater, sound studio, or signal processing equipment? If so, you’ll need a clean power supply.
It may be wise to start using electronic power in your home. There are common problems that cause reduced performance, such as power outages, frequency fluctuations, constant high or low voltage, momentary high voltage spikes, and power surges. Power conditioners help with these problems.
You are a music lover and want the highest quality sound from your audio equipment. The same goes for the movie buff and the picture on his TV. Professionals are interested in making the equipment work for them, not the other way around. Power conditioners will produce from barely noticeable to noticeable differences in sound and picture quality, depending on how much interference he is trying to correct.
Since it cannot be seen visually, you are probably unaware of the effects of power fluctuations on your equipment. Deterioration can happen gradually, and you may not notice the degradation until it’s too late. A power conditioner helps keep your equipment in good condition, extending the life of your system components, and therefore saves you money.
Home theater power conditioner Price:
Under $150
- Pyle Power Sequence Conditioner
Under $200
- Furman Power Conditioner
- Panamax 8-Outlet Home Theater Power Conditioning
Under $400
- Panamax 9-Outlet Home Theater Power Conditioning
