Skip to main content

The higher the speed, the faster the job gets done – that’s why most units operate at 2000-4000 rpm. All models have a depth limiter so that all screws are screwed in to the same depth.

Drywall screw guns join plasterboard and wood panels in a flash. They can be used to pull the drywall or install insulation in and around the house at record speed.

The Best Professional Drywall Screw Guns

DEWALT 20V MAX XR Drywall Screw Gun

 4,9 Rating


  • LED light for visibility in tight spaces.
  • Up to 4,400 rpm.
  • DEWALT-built brushless motor delivers maximum runtime.
Check Best Price

The DEWALT Li-Ion Brushless Drywall ScrewGun Baretool features a DEWALT brushless motor that delivers superior performance and maximum run time. The Li-Ion battery with fuel gauge provides 33-Percent more capacity than standard packs. The screw gun offers superior performance and fast application speed. It is ergonomically designed for less worker fatigue and provides optimum runtime for a variety of jobs. A belt hook is included for portability as well as LED light for visibility in tight spaces. This is a bare-tool item – battery sold separately.

How to Use Drywall Screw Guns Properly

Buyer’s guide for drywall screw guns

This review and guide provide information on some best drywall screw guns you can find.

There are quite a few manufacturers of drywall screw guns in the home improvement market today, and prices vary greatly depending on the model and design. From a pure price standpoint, there are drywall screw guns in models that can be had for just under $95 each. At the other end of the scale, however, there is a drywall screw gun that can cost interested hobbyists nearly $193.

The best drywall screw guns

Drywall Screw Guns

All our reviews are based exclusively on expert judgments or practical experience with most of the drywall screw guns we have tested. We strive to make our guide as independent and as detailed as possible.

Reviews Drywall Screw Guns

Milwaukee M18 FUEL Drywall Screw Gun

  • Delivers 4,500 RPM’s to provide faster than corded productivity.
  • AUTO START Mode offers 3x longer run time.
  • Voltage: 18 V.

 4,8 Rating

Check Price

Maximum torque

The M18 FUEL Drywall Screw Gun is Faster than corded, features auto start functionality, and delivers up to 3X longer run time than other cordless competitors. The POWERSTATE Brushless motor spins at 4,500 RPM’s resulting in faster productivity. The M18 FUEL Drywall Screw Gun delivers the balance and weight desired by professionals for all-day use.

DEWALT Drywall Screw Gun

  • Two-finger, rubber trigger for increased comfort.
  • Lightweight with excellent ergonomics.
  • Variable-speed motor operates from 0-5,300 RPM.

 4,9 Rating

Check Price

Impact Mechanism With Two Hammers

DEWALT drywall screw gun was extensively tested on real-world job sites. Designed for professional drywall applications, this tool is equipped with a high-speed transmission for production drywall hanging. With a depth-sensitive nosepiece, you can work in confidence that fastener depth will be consistent every time.


  • Powerful 6.0 AMP motor with 0-6,000 RPM.
  • Built-in L.E.D. light illuminates work area.
  • Large variable speed trigger.

 4,8 Rating

Check Price

Powerful Air Impact Wrenches

Makita drywall screwdrivers deliver speed, power, and ergonomics for framing and drywall applications. Makita’s drywall screwdrivers are powered by Makita-built motors with a range of rpm capabilities. Features include adjustable depth locator assembly with Sure-Lock engineered for consistent screw depth and a large variable speed trigger with a lock-on button designed for continuous use. Makita drywall screwdrivers are ergonomically-designed with less weight for increased comfort. Convenience features include L.E.D. lights to illuminate the work surface, depth locator holder for storage during framing applications, and a bit of storage on the base of the grip.

What is a drywall screw gun?

Just like cordless screwdrivers and drills, the drywall screw guns fulfill their role as a powerful tool on the construction site. It specializes in quickly screwing and unscrewing screws in various material combinations and is therefore used in particular for construction with plasterboard on wooden or metal frameworks. In addition to this specialization in interior construction, drywall screw guns are also suitable for fastening wooden panels on patio paths or when building a house on wood.

Drywall screw guns do not have their own drill chuck, so they cannot be used to drill holes like a drill press. A cordless screwdriver with higher torque or impact force is also needed to screw in larger fasteners. The talent of a drywall screw gun lies in its high speed, which allows many screws to be installed efficiently and in the shortest possible time. In addition, drywall screw guns are convenient, lightweight, and extremely easy to use.

What are the types of drywall screw guns?

There are two types of drywall guns: a drywall screw gun without a magazine and a drywall gun with a magazine.

  • Drywall screw guns without a magazine.

It is easy to use and fits comfortably in the hand. For the do-it-yourselfer, a simple drywall screw gun is usually sufficient, where each screw must be manually placed on the gun. After a little practice, this can also be done at short intervals, so that nothing stands in the way of a quick screw connection.

  • Drywall screw guns with a magazine.

Convenient to hold when working with one hand, but also has weight. The drywall screw guns with a magazine are recommended for professionals who screw in a lot of drywall screws every day. The self-tapping screws are screwed in automatically, which greatly speeds up the work.

The magazine drywall screw guns have the advantage that you can use them to fasten drywall screw guns so that the individual screws are automatically tightened one after the other. Only when the magazine is used up, a new set of screws must be created.

What should you look for when buying drywall screws guns?

If you are renovating or remodeling your home and want to install drywall, you will need a drywall screw gun. This power tool will make the installation of drywall screw guns much easier.

When buying should pay attention to the following:

  • Power consumption in watts.

Manufacturers of electrical appliances always specify how much power they can produce, i.e., how much electricity they can consume at any given time without affecting the life of the appliance itself. Depending on whether the device is powered directly from the mains or from the battery, this power is specified in watts (mains operation) or in volts and amps (battery).

For drywall screw guns, the maximum power consumption is about 500 watts. The continuous power consumption is therefore approx. 450 to 550 W.

The indicated power does not give any information about the actual “power” of the electrical device, but shows how much energy the device absorbs and converts during operation.

  • Rotation speed.

If you want to know how fast a drywall screw gun will drive screws into the material, you should take a look at the maximum idle speed. The more revolutions per minute marked for that particular product, the faster it will work.

The drywall screw guns test winner should ideally have more than 6,000 rpm to work extra fast. However, most models have 4,000 to 5,000 rpm, and 2,000 to 2,500 rpm is also possible.

  • Torque.

The torque of each drywall screw gun tells you how tightly the screws can be fastened into the material. This value is given in Newton-meters (Nm) and is usually between 10 and 20 Nm for drywall screw guns. The force of drywall screw guns is relatively low.

A drywall screw gun can be used to join materials made of wood, metal, and plaster without any problems – a torque of 10 to 20 Nm is sufficient. However, hard materials require a higher torque. If you plan to use a drywall screw gun to work mainly with metal, a torque of 15 Nm or more is recommended; for wood, 10 Nm is sufficient.

If the torque is not sufficient for metal joints, the drywall screw guns may be damaged.

  • Toolholder in inches.

Not every screw is suitable for a drywall screw gun holder. In fact, the models in the drywall screw guns comparison only use 1/4-inch screws with a hexagonal profile. Therefore, screws must not exceed 0.25 inches in diameter and must have six edges.

Inside hex screws are compact and inexpensive. They are (more) preferred for interior work because rust can form in the hexagon cavity of the screw head due to water and dirt buildup.

  • More features.

If you want to make sure your drywall screw guns are stored in a safe place, a matching shipping case, often included in the deal, is just the thing. The DIYer may also want the special luxury of a belt hook, to which you can easily attach drywall screw guns, leaving both hands free for intermediate work.

  • Depth stop.

The adjustable depth stop is the flagship feature of any drywall screw gun. With this technology, you can preset how deep the screw should go into the material. This is the only way to ensure that the screws are driven in evenly and just below the surface of the material. This feature has given the drywall screw guns its alternative name of “depth drywall screw guns”.

  • Left-right rotation.

Like any drywall screw guns, the model usually has a switch for left-right rotation. This makes it possible not only to screw in screws but also to unscrew them if necessary.
Turning clockwise: screw in. Turning to the left: unscrew the screw.

Air Drywall Screw Guns:


Under 100$

  • DEWALT Drywall Screw Gun
  • DEWALT 20V MAX XR Drywall Screw Gun
  • Milwaukee M18 FUEL Drywall Screw Gun

How does drywall screw guns work?

Drywall screw guns do not have their own drill chuck, so they cannot be used to drill holes like a drill. Screwing in larger fasteners also requires a cordless drywall screw gun with higher torque or impact force.

To use a drywall screw gun, you must set the proper depth on the head. Once the head is set, you need to place the drywall screw guns on the surface of the drywall and pull the trigger. The motor will spin and the screw will drive into the drywall until it reaches the desired depth, where it will automatically stop.

The talent of a drywall screw gun lies in its high speed, which allows many screws to be installed efficiently and in the shortest amount of time. In addition, drywall screw guns are comfortable, lightweight, and extremely easy to use.

Conclusion about the drywall screw guns

The drywall screw guns are mainly used in interior construction, where it is used to join two different materials such as wood, metal, or drywall.
Drywall screw guns have a high speed that allows screws to be driven in and out at maximum speed. The torque is specifically designed for wood, metal, and drywall applications such as drywall. The drywall screw gun holder is designed for screws with a 1/4″ hex that must be manually placed on the drywall screw gun’s nozzle.

FAQ- Drywall Screw Guns

✅ How much does a drywall gun weigh?

Corded drywall screw guns are particularly advantageous due to their lightweight, which makes it easier for the craftsman to work. As a rule, such a drywall screw gun should not weigh more than 3 lb.
However, the exception proves the rule with this powerful tool as well. Cordless drywall screw guns for drywall and with magazine weigh up to 4 lb.

✅ What is the difference between a drill and a cordless screwdriver?

Unlike a drill, even the best drywall screw guns do not have their own drill chuck that allows you to drill holes in the wall. For a drywall screw guns to do the best job, it specializes exclusively in joining two materials by screwing in screws, and the selection of available screws is limited to a 1/4-inch socket.

Its advantage is its high speed of rotation, meaning screws can be driven through wood, metal, or drywall at a very high speed. However, if you want to drive larger screws, you’ll need to use a cordless drywall screw guns because the drywall gun has low torque.

✅ How do you tighten drywall?

Drywall is used to easily divide a room. It can be pulled into a room freestanding or attached to an existing wall. It gets its name from the drywall material used, which is dry gypsum board instead of “wet” building materials like plaster or concrete. Since the building material does not have to be touched to dry at rest, the time required to install drywall is much less.

✅ There are also cordless drywall screw guns?

Working on the mains.
When a drywall screw gun is powered by a cord from a local power source, it usually has more power than a cordless drywall screw gun. It also has no limit to how long it can be used, provided the power is not unexpectedly interrupted. However, the place of use depends on the available power source. A long cord is appropriate here to have enough room to maneuver while working, even if you are balancing on a ladder.
Battery operation.
The power is slightly below the maximum value of a mains-powered high-speed drywall screw guns but is still sufficient for occasional drywall screw guns work. The operating time is limited by the battery life, but can be extended with a second battery for the drywall screw guns.

Max Welder

Max Welder

Hi! I'm Max Welder ( I always wanted to work with my own hands, repair something, do things. Now I combine my knowledge with computers and my own knowledge in the field of mechanics in order to understand which tools I like the most. I hope to convey some knowledge and experience.

Leave a Reply