Skip to main content

Cork is a natural flooring that can be used in many different ways and is extremely versatile. A lacquered or sealed cork floor is much easier to clean, and it is also more durable.

Cork floors have good insulating properties, are especially light at the joints due to the soft material, and absorb any noise well. Suitable for children’s rooms, rental apartments, and first-floor apartments with an unheated basement underneath.

The Best Cork Flooring

Hygloss Products Cork Roll

 4,9 Rating


  • Easy to clean off.
  • Endless possibilities for the crafted.
  • 2 mm cork roll is 12 x 24 inches.
Check Best Price

A roll of cork is easy to cut into any shape you want. The beauty of this handy cork is that not only is it great quality, but you can make a corkboard of absolutely any size. Fill an entire wall in your home or classroom to hang things on, or use one sheet for several pictures you want to show. They make great sliders for upholstered furniture You’re wasting good money on hardwood flooring, laminate or carpeting.

Why choose cork flooring?

How To Choose Cork Flooring for Home?

Buyer’s guide for cork flooring for home

This review and guide provide information on some best cork flooring for the home you can find.

There are quite a few manufacturers of cork flooring for home on the market, and the prices vary greatly. From a pure price point of view, the type of cork flooring for the home can be priced from $11 to $29.

The Best Cork Flooring for Home For The Money

Cork Flooring for Home

All our reviews are based exclusively on expert judgments or practical experience with most of the cork flooring for home we have tested. We strive to make our guide as independent and as detailed as possible.

Corks Flooring for Home in Comparison

Con-Tact Brand Natural Cork

  • 12 inch wide x 4 feet long.
  • Protect your floors.
  • It Can be easily cut into any size or shape.

 4,8 Rating

Check Price

Self-adhesive natural cork

You can protect the surface of your floors by gluing natural cork to the base of chairs and other pieces of furniture, so it won’t scratch. Cork is easy enough to work with, you need to remove the base and apply it to any clean flat surface. This cork flooring is easy to cut into any size or shape, absorbs any sound well, and is good for DIY or in the office.


  • Bulletin Boards for home, office, or school.
  • Natural rolled cork.
  • The trackable surface.

 4,9 Rating

Check Price

Fine-grained self-adhesive cork surface

Ideal for use as bulletin boards, cork wall coverings, tack boards, floor underpayment, and manufacturing components such as spacers, hobby, and other cork products

VViViD Natural Texture Cork Roll

  • Easy Installation.
  • Highly scratch resistant.
  • Lightweight 0.08in thick.

 4,8 Rating

Check Price

High scratch resistance

The self-healing surface won’t show punctures and is very resistant to scratches and dents. This film makes excellent shelf and drawer liners, can be easily made into a custom message or photo boards, or used in virtually any other craft project that you can imagine. Best of all, the acrylic-based adhesive backing means that this film can stick to any non-porous surface without damage or the need for any messy adhesive.

What is Cork Flooring?

Before you buy a cork floor, you should take a closer look at the material and the production of cork boards.

The positive news is that cork flooring is a one hundred percent natural product. Cork is obtained from the bark of the cork oak. This oak grows in the Mediterranean region and is particularly common in Spain and Portugal. Spain and Portugal are therefore also considered the largest exporters of cork.

Especially nice for nature-conscious buyers is that no single tree has to be felled for the extraction of the material. The bark is removed and the tree can continue to live. The bark of the oak is used to make tiles or boards that can be glued to the substrate.

Often the cork floor tiles can be bought sealed. Thus, they are particularly stable and durable. This is also good for all those buyers who plan to use the cork floor children’s room.

Cork develops its positive properties best at a room temperature of about 68℉.


What Are The Types Of Cork Flooring for Home?

Cork floors are a natural product that simply looks beautiful. If you are looking for a cork floor, before you buy it, you should think about what you want to use it for.

There are several types of  cork flooring:

  • Flooring.

When you choose cork boards, they are usually used as flooring. This means that you will be using cork boards as the actual flooring.

You usually have a choice between natural cork tiles (meaning they have little treatment and have the typical look of cork) or designer floors. These are not directly recognizable as being made of cork. These are design floors that have both the texture of wood and (very rarely) imitation concrete. The design has a few limitations.

  • Floor underlay (roll cork).

If you choose rolled cork as the floor underlay for your cork floor, it can be used as a floor underlay for other floor coverings, such as if you want to install laminate or need the substrate is for a linoleum floor.

We recommend using rolled cork, as it also combines the positive properties of cork bark. When you install a layer of rolled cork, it muffles the sound of footsteps and keeps the room warm and insulated from the cold outside. Rolled cork is also easy to install, as it is flexible and very stable.

What should you look for when buying the cork flooring?

As with hardwood flooring or vinyl laminate, it’s not only important to know how you’ll install the floor later, but there are a few important things to look for when buying to choose the best cork.

When buying should pay attention to the following:

  • Durability.

On average, cork floors are between 0.16 and 0.24 inches thick. Corkboard is made up of three different layers – a top layer of cork, compacted fiberboard, and a substrate. Of course, you can also buy corkboard or rolled cork in greater or lesser thickness, depending on whether it will be used as a flooring or as a substrate.

  • Installation.

You can glue cork backs (self-adhesive cork) or buy prefabricated cork panels for clicking. Which option you use depends on the installation conditions in your home. Adhesive cork is typically 0.16 to 0.24 inches thick and is suitable for a flat cork floor that also needs to be durable and very stable. If you prefer adhesive cork, then it is sufficient if the floor underneath is flat.

When installing a snap-in variety (such as snap-in laminate), unlike adhesive cork, always make sure you have 0.4 to 0.6 inches of clearance from any fixed components, such as heating pipes and another wiring, in the floor and stick to the wall.

  • Seal.

If you want to use cork flooring as a surface, it makes sense to buy painted boards. Sealing provides more hygiene because nothing settles in the material. In addition, lacquering makes the floor easier to maintain and more durable, for example, for use in children’s rooms with cork floors. If you choose a lacquered option, you can also lacquer the cork floor later, based on cork flooring prices, or do it yourself.

Cork Flooring for Home Price:


Under 20$

  • Con-Tact Brand Natural Cork
  • VIZIONSTAR Cork Roll
  • VViViD Natural Texture Cork Roll

Under 30$

  • Hygloss Products Cork Roll


No matter what flooring, the floor in your own home should look attractive in terms of design, blend in with the rest of your furniture and, if possible, be comfortable and attractive. Because when you come home after a long day at work, all you need to do is relax and feel good.

Nature lovers in particular have been relying more and more on special flooring for some time. Cork flooring can be used in two ways. Either you use the floor as flooring with beautiful wood, concrete, or tile look, or you buy a cork floor liner (rolled cork) that can serve as the substrate is for another floor (like parquet or laminate). If you have a heated floor, you must make sure that the cork floor does not insulate too much heat.

The bark of the cork tree (also cork oak) is used completely. The highest quality parts are used for bottle stoppers, the less good quality parts are used for floors, such as cork flooring. The rest is used as wood material for wall insulation, etc.


FAQs- The Best Option Cork Flooring

✅ How can I clean my cork floor?

To clean your cork floor, use a parquet floor cleaner or a special cork cleaner.
Wipe the cork floor with a mop and a semi-dry cloth once or twice a week. Use a vacuum cleaner several times a week.

The color of cork changes over time. If you don’t like the color of the cork floor anymore, you can grind away the cork flooring. If your cork floor looks like wood, the texture may be lost.

✅ What's better to hire a professional cork flooring installer or do it yourself?

To install carpeting, you always need a professional, while you can easily do cork tile and planks yourself.

If you can calculate to buy everything you need, and perform the steps that will be needed to properly install cork flooring, you can save significantly by doing the job yourself. But, if any part of the cork flooring installation job makes you apprehensive, it’s better to hire a professional.

✅ How do you tell the difference between a good cork floor and a bad one?

Cork flooring is a natural product that not only looks good but is also quite easy to maintain. Price is the main sign of quality cork tiles, poor quality tiles have a much lower cost. Thicker tiles are much stronger, more durable, and can be repaired if necessary. Also, a warranty usually shows which end of the quality spectrum the planks belong to. Better coverage usually means higher quality.

✅ If cork comes from tree bark, why isn't it waterproof?

Cork is a material that is composed of natural fibers. Like bamboo, it absorbs moisture and water fairly quickly. And this causes the material to spread, buckle, and crack. If the humidity is very high or the floor is flooded with water, it can lead to the final deterioration of the cork flooring.

Max Welder

Max Welder

Hi! I'm Max Welder ( I always wanted to work with my own hands, repair something, do things. Now I combine my knowledge with computers and my own knowledge in the field of mechanics in order to understand which tools I like the most. I hope to convey some knowledge and experience.

Leave a Reply