Skip to main content

One of the biggest benefits you could do as a responsible gun owner is to use and reuse ammunition

Re-using ammunition saves you money, but it’s also a great way to get more involved in shooting.

Different items are usually used for reloading, one of which is the brass tumbler. The tumbler for brass is used to clean off excess brass. The tumbler for brass will help you get the job done faster.

Using a tumbler

Tarnished cases are transformed into clean and professional-looking ones precisely with the help of the brass tumbler. In addition, the latter is also safe to use. The cleaner brass will also protect your dies from debris accumulation.

Types of tumblers

Important: There are two types of tumblers: “wet” and “dry”. Both have their own advantages.

Wet cleaning both inside and outside the brass body, but requires that the brass be dried after use in the tumbler. Dry cleaning only cleans the outside of the case, but you can begin the reloading process immediately.

Tarnished brass is a safety hazard and looks unprofessional.

Why use a tumbler for reloading?

Before tumblers were invented, people cleaned the cases by hand using a mixture of citric acid and water or soap and water.
Some people used a rag and cleaned each box one by one. This took a lot of time. Not to mention a complicated and very slow process.
But after such actions after often the results were not very satisfactory and unkempt.
You can get rid of all that with a tumbler. And also create a more attractive and professional case for reuse.

  • An over loader can benefit from a tumbler in the following ways:
    Using a tumbler is one of the biggest savings you can make as an over loader.
  • The bullet casing is usually one of the most expensive parts of a bullet. And it is the only part you can reuse. Using a tumbler can help you make some serious savings by reusing the case.
  • You can also buy fired cartridges. Or get brass ones lying around at different ranges. Whisk them in a glass, and you’re all set.
  • Cleaning bullets is an extremely difficult task, but with the use of a tumbler, it is very easy.
  • Using the tumbler will also help you clean ammunition for your enjoyment, making it more professional.
  • In addition to the above, it will also help you save a lot of time. It’s true that it gets the job done in considerably less time. And at the same time it gives a more professional result.

Wet tumbler for brass - The Best Choice

Frankford Arsenal Platinum Series Rotary Tumbler

 4,9 Rating

Frankford Arsenal Platinum Series Rotary Tumbler

Features:

  • 7-liter capacity.
  • Cleans up to 1,000 cases of .223 brass at once.
  • Features a maintenance-free drive train.
Check Best Price

It is an ideal accessory for every reloading bench. Features a maintenance-free drive train that eliminates the chances of needing to replace a belt and has a built-in timer in the base that can be set to run for up to 3 hours, shutting off automatically.

Wet Tumbling with Ultimate Reloader – Video

Buyer’s guide for a wet tumbler for brass

This review and guide provide information on the wet tumbler for brass you can find.

There are quite a few manufacturers of wet tumblers for brass on the market, and the prices vary greatly. From a pure price point of view, the type of wet tumbler for brass can be priced from $100 to $235.

Wet tumbler for brass for the money

best wet tumbler for brass

Related posts about hand tools and repairs:

All our reviews are based exclusively on expert judgments or practical experience with most of the wet tumbler for brass we have tested. We strive to make our guide as independent and as detailed as possible.

Wet tumblers for brass in comparison

Frankford Arsenal Platinum Series Rotary Tumbler Lite

Frankford Arsenal Platinum Series Rotary Tumbler Lite
  • 110 volts.
  • 3.3L capacity.
  • Cleaning of up to 300 cases of 223 brass at a time.

 4,8 Rating

Check Price

Best Brass Tumbler Reviews

Many people like to hunt or just practice shooting guns at a shooting range. These hobbies involve spending a lot of money to buy new ammunition. However, there is a way to save money.

The bullet casing is the most expensive part of a cartridge. With a press kit, they can be reloaded and used again. To make this out of brass, the cases have to be very clean.

So-called tumblers are one way to clean them. Meanwhile, the term “tumbler” has become common among reloaders to refer to a type of hull polishing device. They come in a variety of capacities and types. To make your choice, you can find valuable information here on how to choose the right device and reviews of several products that may interest you.

Replenishing your ammunition is not only a great way to save some money, but it’s also a great way to get more involved in this wonderful gun hobby.

Reloading usually requires many items, including a brass tumbler. Tarnished brass looks unprofessional and is a safety hazard.

There are a huge number of different brass cleaners on the market. To be satisfied with the decision you make, you need to understand the features of these devices. Personal preferences should also be taken into account.

Ease of use

Is ideal for cleaning specialty cartridges and smaller batches of brass, delivering unmatched accuracy at the bench and in the field. Features a leak-proof cap design with a rubber seal to ensure a mess-free clean. Easy ON/OFF operation.

Hornady Rotary Case Tumbler

Hornady Rotary Case Tumbler
  • Holds 5 pounds of brass cartridge cases.
  • Digital timer.
  •  Up to 8 hours of work.

 4,9 Rating

Check Price

Large Capacity

Designed for cleaning large quantities of cases at one time, quickly and efficiently.  The digital timer allows the tumbler to run for up to 8 hours, in 30-minute increments.

What should I consider when choosing a brass tumbler?

There are different types of tumblers available on the market. And it makes it easy to find one that is perfect for your needs. When choosing a tumbler, you should consider the following important points:

Quality:

In everything you buy, quality matters. The higher the price of the tumbler, the better it will be. But sometimes the price is high and the quality is low.
Make sure that all parts are serviceable and perfect for the job. Once again, check the gears and bolts. Check that they are screwed on properly.
They should remain solid after prolonged cleaning. Also, make sure that the speed of the cleaning wheels is constant throughout.

Durability:

You need durability to make it work in the long run. Tumblers for brass are usually made of steel or plastic. Naturally, the steel one is more durable. This is why the steel tumbler for brass is more expensive than the plastic one.
When choosing a tumbler for brass, it is important to consider all of these factors.
Strength and size are the most important and can really influence your decision.

The types of drawers you are going to clean:

Generally, all tumblers for brass will accommodate almost all types of cases.
But there are certain non-standard tumblers for a certain type of case. Before you make the decisive move, let the salesperson know the size of your case.
It is recommended that you buy a tumbler for brass that accommodates the largest case size. So if you are working with different sizes, this may be helpful.

The number of sinks that the tumbler for brass can hold:

It is very important to check the storage of the tumbler for brass.
To ensure faster cleaning, it is recommended to use larger tumblers. Most models can hold anywhere from five hundred to a thousand shells.
However, the price of a tumbler for brass increases as the number of shells increases. Consider all of these factors when choosing a tumbler for brass.

Wet Tumbler For Brass
Price:

Under $100

  • Frankford Arsenal Platinum Series Rotary Tumbler Lite

Under $300

  • Frankford Arsenal Platinum Series Rotary Tumbler
  • Hornady Rotary Case Tumbler
Max Welder

Max Welder

Hi! I'm Max Welder (toolsproper.com). I always wanted to work with my own hands, repair something, do things. Now I combine my knowledge with computers and my own knowledge in the field of mechanics in order to understand which tools I like the most. I hope to convey some knowledge and experience.

Leave a Reply